PlatePierce - Technical Specifications
Submitted by admin on Sat, 2006-12-16 07:46.
Instruments
PlatePierce . Technical Specifications
PERFORMANCE
Cycle Time: 4 seconds
Piercing Force: 1,000 pounds per plate
Penetration Depth: 3 mm (fixed, plate independent)
Capacity: Single standard microplate
LABWARE COMPATIBILITY
Microplates:Standard microplates in 96 and 384 well formats
OPERATING REQUIREMENTS
Electrical: 100-240 VAC, 50-60 Hz, AC Current 0.5A/115V 3A/230V (typical)
Inrush Current: 20A/115V 40A/230V (typical)
Air: 57 Lpm at 6.2 bar (2 cfm at 90 psi)
Software: PlatePierce Diagnostics for real-time, manual control (setup/troubleshooting)
BenchWorks™ or VWorks™ for use with a Velocity11 lab automation system
PlatePierce ActiveX Commands when using 3rd party software to control the PlatePierce
Controller: PC using Windows 2000 or XP operating system
Interface: RS-232 serial port with DB 9 connector
Certification: CE certified
PIN PLATES
Velocity11 offers a variety of Pin Plates for piercing applications. See the PlatePierce Pin Plate Selection Guide (below) for the latest application information, Pin Plate part numbers, etc.
Download PlatePierce Pin Plate Selection Guide>
PERIPHERAL INSTRUMENT COMPATIBILITY
Other Velocity11 Instruments: Bravo™ automated liquid handling platform, VPrep® pipetting system, VCode® bar code print and apply station, PlateLoc thermal plate sealer (all of these require the use of an automated plate handler/robot meeting the accesibility requirements above for integration).
Third Party Instruments: Compatible with some reagent dispensers, plate shakers, plate readers, sealers, washers, compound reformatters, plate storage systems, etc. when used with an automated plate handler/robot meeting the accesibility requirements above for integration and appropriate compatible software.
DIMENSIONS
PlatePierce (HxWxL): 35.6 x 20.3 x 34.3 cm (14" x 8" x 13.5")
Weight: 19.1 kg (42 lbs)
Download PlatePierce PDF Datasheet >
|
 |
|
